H12-893_V1.0 QUESTIONS ANSWERS, H12-893_V1.0 RELIABLE TEST PRACTICE

H12-893_V1.0 Questions Answers, H12-893_V1.0 Reliable Test Practice

H12-893_V1.0 Questions Answers, H12-893_V1.0 Reliable Test Practice

Blog Article

Tags: H12-893_V1.0 Questions Answers, H12-893_V1.0 Reliable Test Practice, Exam Dumps H12-893_V1.0 Pdf, H12-893_V1.0 Valid Exam Sims, H12-893_V1.0 Reliable Test Materials

If you are not aware of your problem, please take a good look at the friends around you! Now getting an international H12-893_V1.0 certificate has become a trend. If you do not hurry to seize the opportunity, you will be far behind others! Now the time cost is so high, choosing H12-893_V1.0 Exam Prep will be your most efficient choice. You can pass the H12-893_V1.0 exam in the shortest possible time to improve your strength.

The PDF is also printable so you can conveniently have a hard copy of Huawei H12-893_V1.0 dumps with you on occasions when you have spare time for quick revision. The PDF is easily downloadable from our website and also has a free demo version available. Experts at Test4Sure have also prepared Huawei H12-893_V1.0 Practice Exam software for your self-assessment.

>> H12-893_V1.0 Questions Answers <<

H12-893_V1.0 Reliable Test Practice & Exam Dumps H12-893_V1.0 Pdf

As you know, we are now facing very great competitive pressure. We need to have more strength to get what we want, and H12-893_V1.0 exam dumps may give you these things. After you use our study materials, you can get H12-893_V1.0 certification, which will better show your ability, among many competitors, you will be very prominent. Using H12-893_V1.0 Exam Prep is an important step for you to improve your soft power. I hope that you can spend a little time understanding what our study materials have to attract customers compared to other products in the industry.

Huawei HCIP-Data Center Network V1.0 Sample Questions (Q24-Q29):

NEW QUESTION # 24
A vNIC can transmit data only in bit stream mode.

  • A. TRUE
  • B. FALSE

Answer: B

Explanation:
A vNIC (virtual Network Interface Card) is a software-emulated network interface used by virtual machines to communicate over a virtual or physical network. The statement's reference to "bit stream mode" is ambiguous but likely implies raw, low-level bit transmission without higher-layer processing.
vNIC Functionality: A vNIC operates at a higher abstraction level than physical NICs. It interfaces with the hypervisor's virtual switch (e.g., Open vSwitch in Huawei environments) and handles data in frames or packets (e.g., Ethernet frames), not just raw bit streams. The hypervisor or host NIC handles the physical bit stream transmission.
Data Transmission: vNICs support various modes depending on configuration (e.g., VirtIO, SR-IOV passthrough), transmitting structured data (frames/packets) rather than solely raw bits. Bit stream transmission is a physical-layer task, not the vNIC's sole mode.
Thus, the statement is FALSE (B) because a vNIC does not transmit data only in bit stream mode; it handles higher-level data structures, with bit-level transmission managed by underlying hardware.


NEW QUESTION # 25
M-LAG configuration consistency check classifies device configurations into key configurations (Type 1) and common configurations (Type 2). This check can be performed in strict or loose mode based on the processing mode when key configurations are inconsistent. Which of the following statements is false about M-LAG configuration consistency check?

  • A. If Type 2 configurations of the two M-LAG member devices are inconsistent, an alarm that indicates key and common configuration inconsistencies is generated.
  • B. In loose mode, if Type 1 configurations of the two M-LAG member devices are inconsistent, the member interface on the M-LAG backup device is in Error-Down state and an alarm is generated, indicating that Type 1 configurations on the two devices are inconsistent.
  • C. If Type 2 configurations of the two M-LAG member devices are inconsistent, the M-LAG running status may be abnormal. Compared with Type 1 configuration problems, Type 2 configuration problems are more likely to be detected and have less impact on the network.
  • D. If Type 1 configurations of the two M-LAG member devices are inconsistent, certain problems may occur, such as loops and long-period packet loss when the status is normal.

Answer: A

Explanation:
To identify the false statement, we evaluate each option based on standard M-LAG documentation, such as Huawei's and Arista's guidelines, which are commonly referenced in HCIP-Data Center Network training.
Option A: In loose mode, if Type 1 configurations of the two M-LAG member devices are inconsistent, the member interface on the M-LAG backup device is in Error-Down state and an alarm is generated, indicating that Type 1 configurations on the two devices are inconsistent.
Evaluation: This statement is true. In loose mode, inconsistencies in Type 1 (key) configurations are still critical, as they can affect M-LAG operation. According to Huawei M-LAG Configuration Guide, when Type 1 configurations are inconsistent in loose mode, the system may place the member interface on the backup device into an Error-Down state and generate an alarm to alert administrators. This ensures that critical issues are flagged, even in loose mode, to prevent loops or packet loss.
Conclusion: True.
Option B: If Type 1 configurations of the two M-LAG member devices are inconsistent, certain problems may occur, such as loops and long-period packet loss when the status is normal.
Evaluation: This statement is true. Type 1 configurations are essential for M-LAG operation, and inconsistencies can lead to severe network issues. For example, mismatched LACP settings or VLAN mappings can create loops or cause packet loss, as noted in Arista M-LAG Documentation. These problems can persist even when the system appears normal, making consistency checks critical for troubleshooting and O&M.
Conclusion: True.
Option C: If Type 2 configurations of the two M-LAG member devices are inconsistent, the M-LAG running status may be abnormal. Compared with Type 1 configuration problems, Type 2 configuration problems are more likely to be detected and have less impact on the network.
Evaluation: This statement is true. Type 2 (common) configurations, such as QoS or STP settings, are less critical but can still affect network performance. According to Huawei M-LAG Best Practices, Type 2 inconsistencies are often detected during consistency checks but have a lower impact on M-LAG operation compared to Type 1 issues. They are also more likely to be flagged during monitoring, as they are less severe and easier to resolve.
Conclusion: True.
Option D: If Type 2 configurations of the two M-LAG member devices are inconsistent, an alarm that indicates key and common configuration inconsistencies is generated.
Evaluation: This statement is false. While Type 2 (common) configuration inconsistencies are detected during consistency checks, they do not typically trigger alarms, especially alarms that specifically indicate both key and common configuration inconsistencies. According to Huawei M-LAG Configuration Guide and Arista M-LAG Documentation, Type 2 inconsistencies may be logged or reported in system logs but are not severe enough to generate critical alarms unless they significantly impact network operation. Alarms are more commonly associated with Type 1 (key) configuration inconsistencies, as they pose a higher risk to M-LAG functionality.
Conclusion: False.


NEW QUESTION # 26
In the spine-leaf DCN architecture, the border leaf node and service leaf node can be deployed on the same device.

  • A. TRUE
  • B. FALSE

Answer: A

Explanation:
In Huawei's spine-leaf data center network (DCN) architecture, the topology consists of spine nodes (core) and leaf nodes (access/aggregation). Leaf nodes can serve different roles:
Border Leaf Node: Connects the DCN to external networks or other domains, handling Layer 3 routing.
Service Leaf Node: Connects to internal services (e.g., servers, VMs), often handling Layer 2/Layer 3 traffic.
In practice, a single physical device can be configured to perform both roles (border and service) if it has the necessary interfaces and routing capabilities. Huawei's CloudFabric documentation supports this flexibility, allowing a leaf switch to act as both a border and service node based on configuration (e.g., using VRFs or VXLAN gateways). This reduces hardware costs and simplifies deployment in smaller DCNs.
The statement is TRUE (A) because the border leaf and service leaf roles can be deployed on the same device in a spine-leaf architecture.


NEW QUESTION # 27
Which of the following statements is false about VXLAN tunnel establishment?

  • A. For a static tunnel, you need to manually configure the local and remote VNIs.
  • B. A VXLAN tunnel is identified by a pair of VTEPs.
  • C. Dynamic tunnels depend on EVPN Type 5 routes to transmit information.
  • D. After a tunnel is established, if one end of the tunnel goes Down, the other end may not go Down.

Answer: C

Explanation:
VXLAN (Virtual Extensible LAN) tunnels are used to encapsulate Layer 2 traffic over a Layer 3 network, a key component in Huawei's CloudFabric data center solutions. Let's evaluate each statement:
A . A VXLAN tunnel is identified by a pair of VTEPs: This is true. A VXLAN tunnel is identified by the pair of VXLAN Tunnel Endpoint (VTEP) IP addresses (local and remote), along with the VNI (VXLAN Network Identifier). This ensures unique tunnel identification. TRUE.
B . After a tunnel is established, if one end of the tunnel goes Down, the other end may not go Down: This is true. VXLAN tunnels are unidirectional, and the status of one end does not automatically affect the other unless the underlay network connectivity (e.g., Layer 3 reachability) is lost. The remote VTEP may remain operational if it can still encapsulate/decapsulate traffic. TRUE.
C . For a static tunnel, you need to manually configure the local and remote VNIs: This is true. In a static VXLAN tunnel, administrators must manually configure the VNI and VTEP IP addresses on both ends, as there is no dynamic control plane (e.g., BGP EVPN) to automate the process. TRUE.
D . Dynamic tunnels depend on EVPN Type 5 routes to transmit information: This is false. Dynamic VXLAN tunnels rely on BGP EVPN as the control plane, but Type 5 routes (IP Prefix routes) are specifically used for advertising host IP routes and external network routes, not for general tunnel establishment. Dynamic tunnel setup primarily uses Type 2 (MAC/IP Advertisement) and Type 3 (Multicast) routes to exchange VNI and VTEP information. Type 5 routes are relevant for Layer 3 routing, not the initial tunnel setup. FALSE.
Thus, D is the false statement because dynamic tunnels depend on EVPN Type 2 and Type 3 routes, not Type 5, for initial establishment.


NEW QUESTION # 28
Which of the following is not an advantage of link aggregation on CE series switches?

  • A. Increased bandwidth
  • B. Improved reliability
  • C. Improved forwarding performance of switches
  • D. Load balancing supported

Answer: C

Explanation:
Link aggregation, often implemented using Link Aggregation Control Protocol (LACP) on Huawei CloudEngine (CE) series switches, combines multiple physical links into a single logical link to enhance network performance and resilience. The primary advantages include:
Load Balancing Supported (B): Link aggregation distributes traffic across multiple links based on hashing algorithms (e.g., source/destination IP or MAC), improving load distribution and preventing any single link from becoming a bottleneck.
Increased Bandwidth (C): By aggregating multiple links (e.g., 1 Gbps ports into a 4 Gbps logical link), the total available bandwidth increases proportionally to the number of links.
Improved Reliability (D): If one link fails, traffic is automatically redistributed to the remaining links, ensuring continuous connectivity and high availability.
However, Improved Forwarding Performance of Switches (A) is not a direct advantage. Forwarding performance relates to the switch's internal packet processing capabilities (e.g., ASIC performance, forwarding table size), which link aggregation does not inherently enhance. While it optimizes link utilization, it doesn't improve the switch's intrinsic forwarding rate or reduce latency at the hardware level. This aligns with Huawei's CE series switch documentation, where link aggregation is described as enhancing bandwidth and reliability, not the switch's core forwarding engine.


NEW QUESTION # 29
......

As long as you spend less time on the game and spend more time on learning, the H12-893_V1.0 study materials can reduce your pressure so that users can feel relaxed and confident during the preparation and certification process on the H12-893_V1.0 exam. It is believed that many users have heard of the H12-893_V1.0 Latest preparation materials from their respective friends or news stories. Our H12-893_V1.0 exam questions are valid and reliable. So why don't you take this step and try on our H12-893_V1.0 study guide? You will not regret your wise choice.

H12-893_V1.0 Reliable Test Practice: https://www.test4sure.com/H12-893_V1.0-pass4sure-vce.html

We make it possible with this braindump, which has been approved by reputable Huawei H12-893_V1.0 Reliable Test Practice experts, and includes all the latest updates, Huawei H12-893_V1.0 Questions Answers Young people are facing greater employment pressure, Huawei H12-893_V1.0 Questions Answers Now our company is here aimed at helping you out of the woods, Huawei H12-893_V1.0 Questions Answers Studying is easy and interesting.

This course first provides an introduction to Javas foundational H12-893_V1.0 Questions Answers functional programming features, including lambda expressions, method references, and functional interfaces.

Test4Sure offers special discounts on value packs and other bundle packs designed H12-893_V1.0 Reliable Test Materials for popular Exam, We make it possible with this braindump, which has been approved by reputable Huawei experts, and includes all the latest updates.

Pass Guaranteed Huawei First-grade H12-893_V1.0 - HCIP-Data Center Network V1.0 Questions Answers

Young people are facing greater employment pressure, Now our company H12-893_V1.0 is here aimed at helping you out of the woods, Studying is easy and interesting, It is convenient for you to study with the paper files.

Report this page